Mailchimp connector
Your Silux Chat bot verifies customers against Mailchimp, then answers questions about their customer records from your live data.
Good to know: Members don't carry the audience name, so subscriptions aren't offered; the subscribe status is returned with the customer.
What your bot can do with Mailchimp
Recognise and verify customers
Finds the customer in Mailchimp by the email address or mobile number they give, checks their name and one more detail, then sends a one-time code to the contact details Mailchimp holds. Nothing personal is shared until the code is entered.
Customers ask: “I want to check my account — it’s Jane Smith, jane@example.com”
Set it up
Most businesses finish in under ten minutes. You need to be able to sign in to Mailchimp as an administrator to create the key.
Step 1 — in Mailchimp
- 1Mailchimp
- 2Profile
- 3Extras
- 4API keys
- 5Create A Key; the data centre is the part after the dash (…-us21
- 6us21).
Least access: grant only the read permissions named above (customers, orders, invoices, bookings or tickets — whichever this connector uses). Never use an owner or full-admin key where Mailchimp lets you create a restricted one.
Step 2 — in Silux Chat
- 1Open Dashboard → Integrations → Connectors and search for “Mailchimp”.
- 2Fill in:
Field Example Stored Data centre (end of your API key, e.g. us21) us21 Setting API key •••••••• Encrypted - 3Press Connect & test. The platform makes a real, read-only call to Mailchimp with a made-up customer and shows a tick or a cross for each capability, with Mailchimp’s exact error if something is refused.
- 4If this is your first way of verifying customers it is switched on automatically; otherwise press Use to verify customers. The platform then runs its chained test (verify → code → account → orders → invoices) with the built-in test customer — no real person is contacted.
Mailchimp identifies API users with a key-and-secret (or username-and-key) pair, sent with HTTP Basic authentication over HTTPS.
How customer verification works
- STEP 1
Customer asks
They ask about their own account. The bot asks for their full name and their email or mobile, plus one more detail such as their postcode.
- STEP 2
Found in Mailchimp
The customer is looked up in Mailchimp by email, then mobile. The surname must match exactly and the first name must match or start with the same letter, plus one more detail.
- STEP 3
Code sent
A 6-digit code goes to the mobile Mailchimp holds (by text, when your plan has SMS) or otherwise to the email it holds. The chat never chooses where it goes.
- STEP 4
Verified
The customer types the code. It is valid for 10 minutes and five wrong attempts cancel it. The verified session lasts 30 minutes.
If the details don’t match, the customer is told only that they couldn’t be matched — never which detail was wrong. If Mailchimp can’t be reached, the bot says it can’t check accounts right now rather than “no account found”. The bot is blocked in code from reading orders, invoices or bookings until verification succeeds. Full details: Customer identity verification & OTP.
What the bot can and cannot see
Can see (after verification)
- Record ID
- Name
- Email address
- Phone / mobile
- Postcode
- Status
Only these standard fields are mapped from Mailchimp’s responses. Everything else in the response is discarded before the bot sees it.
Never sees
- passwords, security answers or login details
- records belonging to anyone other than the verified customer
- anything outside the fields listed alongside
Security
Keys encrypted at rest
Credentials are stored encrypted, shown only masked after saving, and destroyed — not just hidden — when you disconnect.
Read-only look-ups
Every capability is a look-up. The connector cannot create, change or delete anything in Mailchimp.
HTTPS only
Calls go to the vendor’s HTTPS address, redirects are not followed, and private network addresses are refused.
Injection-safe
Values a customer types are cleaned before they are placed in Mailchimp’s search, and URL-encoded in addresses.
Other customers filtered out
A row that names a different customer’s email is dropped, whatever the vendor’s search returned.
Checked daily
Connections are re-tested every day, and the owner is emailed if a working connection starts failing.
More: Security & data protection.
Technical details
For developers and IT teams: the Mailchimp endpoints this connector reads, relative to https://{dc}.api.mailchimp.com/3.0. Values in braces come from the settings you enter.
| Capability | Request | Standard fields returned |
|---|---|---|
| Recognise and verify customers | GET/search-members | id, name, email, phone, postcode, status |
Test level: Documented-API tested. Each capability is run automatically against Mailchimp’s documented example responses and must produce the standard fields; your own connection is then tested with a real call when you connect. The bot receives these through the standard Account Connect endpoints, exactly as if you had built them yourself.
Troubleshooting
| What you see | Likely cause and fix |
|---|---|
| “the vendor refused the credentials (401)” or (403) | The key was revoked, has expired or was copied incompletely, or it lacks a read permission this connector needs. Create a fresh read-only key in Mailchimp and reconnect. |
| “That Data centre (end of your API key, e.g. us21) doesn’t look right” | Enter it in the form shown, e.g. us21 — without https:// or a trailing slash. |
| Customers are “not matched” although they exist | Customers are looked up by email or mobile, not postcode. Check the customer’s email or mobile is saved on their Mailchimp record, and that the surname matches. |
| A capability shows a cross but others work | That permission wasn’t granted in Mailchimp, or your Mailchimp plan doesn’t include that part of the API. Grant it and press Test. |
| “the vendor kept rate-limiting the request” | Mailchimp returned “too many requests” three times in a row. The platform already waits and retries automatically (up to 10 seconds, as Mailchimp asks); if it persists, ask Mailchimp about your API quota. |
| Results are empty for a verified customer | The records exist under a different email or customer record in Mailchimp, or none are recent. Check the customer’s record in Mailchimp directly. |
Full error reference: Troubleshooting & error reference.
Frequently asked questions
Is the Mailchimp connection read-only?
Yes. Every request Silux Chat makes to Mailchimp is a look-up; none creates, changes or deletes anything in Mailchimp. Give the key or sign-in read-only permissions wherever Mailchimp offers them.
Do I need a developer to connect Mailchimp?
No. You paste the details listed in the set-up steps in Dashboard → Integrations → Connectors and press “Connect & test”. The platform makes a real call to Mailchimp straight away and shows exactly which features work.
How does the bot know it is really my customer?
It finds the customer in Mailchimp by the email or mobile they give, checks their name and one more detail, then sends a one-time code to the mobile or email held in Mailchimp — never to one typed in the chat. The code lasts 10 minutes, five wrong attempts cancel it, and a verified session lasts 30 minutes.
What happens if my Mailchimp key is revoked or expires?
The bot tells customers it can’t check their account right now — it never pretends there are “no orders”. Connections are re-tested daily and the account owner is emailed when a working connection starts failing. Reconnect it in Dashboard → Integrations → Connectors.
How has the Mailchimp connector been tested?
It is Documented-API tested: every capability is run automatically against Mailchimp’s documented example responses and must produce the standard fields. When you connect, it is tested again with a real call to your own Mailchimp account before your bot uses it.
Other marketing connectors
ActiveCampaign
Recognise and verify customers
Brevo (Sendinblue)
Recognise and verify customers
Campaign Monitor
Recognise and verify customers · Subscriptions and plans
Kit (ConvertKit)
Recognise and verify customers · Subscriptions and plans
Klaviyo
Recognise and verify customers · Subscriptions and plans
MailerLite
Recognise and verify customers · Subscriptions and plans
Omnisend
Recognise and verify customers · Subscriptions and plans
Need help with your integration?
Our integration team can review your endpoints, help you choose the right connector and check a test run with you. Tell us which system you use and what you would like the bot to answer.